When your tiled floor has completely set in a mortar after a minimum waiting period of at least 24 hours, it is only then that you should re-enter the room and inspect your handiwork close-up in order to proceed with the next stage.
Before you really do employ tile grout into your grout lines, however, you need to prepare the lines that they are prepared to be filled. To know more about floor tile grouting you can pop over to http://www.steampronc.com/interior-services/tile-grout/.
To start with, do the clear and eliminate all of your flooring tile spacers in the grout lines. There’ll likely be elevated stains of mortar at certain points on your grout lines which were overlooked during the flooring tile installation procedure, and also to attain the ideal grout finish all these have to be taken off.
If high stains of mortar were abandoned from the grout lines when you put on the tile grout, these may show through the shaped grout when completed, or perhaps if they aren’t seen after grouting they could eventually lead to cracking in the grout specified time.
Therefore, it’s extremely important to clean grout lines properly before applying tile grout and to do this it is possible to use an assortment of tools. Dried mortar resembles concrete and grout lines are rather narrow, so naturally, you’re likely to require a thin tipped tool strong sufficient for chipping and scratching purposes.